$845.00
FEATURES
✓ 3 fin setup (Thruster)
✓ Black Noiz is a performance shortboard designed to give the surfer all the control and hold when the waves get serious but still be on your shortboard.
✓ It has a smooth, connected and controlled feeling when riding it, with reliability when tackling some of the more serious waves.
✓ Polyurethane Epoxy Construction
✓ The rounded pin tail lends the board to fitting tight in the pocket yet also draw some clean open face carves.
✓ The rocker is an extension of the White Noiz rocker, with it’s medium entry, the balanced continuous rocker will give you all the speed, but also have the freedom from many different areas along the board.
✓ The concaves are a very slight rolled vee in the entry, through to single concave under the front foot, with a single-double through the fins to a slight double vee out the tail. These concaves are slightly shallower than the White Noiz to all the board to sit a little lower in the wave face, giving plenty of control at the higher speeds in more powerful surf.
✓ The outline is a little more drawn out / narrower in the nose, and slightly more refined in the tail to allow the rounded pin tail connect nicely without any sudden release of water flow along the rail line.
RECOMMENDED FINS
We recommend any of our Futures Thruster fins, see here.
DIMENSIONS
Length |
Width |
Thick |
Volume (L) |
5’5 |
17 ⅞ | 1 ⅞ | 19.16L |
5'6 |
18 | 1 15/16 | 20.46L |
5'8 |
18 ¼ | 2 1/16 | 22.34L |
5'9 |
18 ½ | 2 ⅛ | 23.87L |
5'10 |
18 ¾ |
2 ¼ |
26.05L |
5'11 |
19 | 2 ⅜ | 27.38L |
6'0 |
19 ¼ | 2 ½ | 39.78L |
6'1 |
19 ½ | 2 ½ | 30.02L |
6'2 |
19 ¾ | 2 ⅝ | 30.95L |
6'3 |
20 | 2 11/16 | 32.19 |
6'4 |
20 ⅛ | 2 11/16 | 33.77L |
6'5 |
20 ¼ | 2 ¾ | 34.48L |
6'6 |
20 ½ | 2 ¾ | 34.97L |
CONSTRUCTION: POLYURETHANE EPOXY CONSTRUCTION
The invisible high-performance technology – PE is a superior alternative to regular PU(Polyurethane Polyester). PE combines a polyurethane foam core with high-grade timber stringer, which is laminated using fiberglass cloth and a high-quality epoxy resin. Haydenshapes opts to use Epoxy resin, PE construction for three key reasons,
1. The optically superior brightening ingredient significantly enhances the whiteness of the board.
2. Our exclusive epoxy is more flexible than polyester and maintains the lively flex pattern typically associated with a new board.
3. It’s better than PU. It is more technical to manufacture and the result in the performance of this construction speaks volumes.
It is more technical to manufacture and the result in the performance of this construction speaks volumes. In keeping with Hayden’s design philosophy of creating innovative and performance surfboards made from only the highest quality materials, the PE construction is lightweight, delivers cutting-edge flex response and speed, and feels remarkably sensitive under your feet.
QUESTIONS
Not sure what size you should be riding? Check out our Volume Calculator, or get in touch today.
Have a question about the best fins, leash or tail pad to go with this board?
Or can’t find what you’re looking for?
Get in touch about a special/custom order today.
CONCERNS WITH SHIPPING?
If your board is damaged during transit simply send us a photo of the damage, a full front and back photo of the board within 24 hours of delivery, and we can offer to replace, repair or refund your order. For more information see our Shipping page.
ABOUT THE BRAND
In 1996 on Sydney’s northern beaches, at the age of 15 Hayden Cox shaped his first string of surfboards from his parent’s backyard for himself, school friends and a few local surfers. Slapped on the top right of each craft, was an ill-formed HS symbol that was soon defined into a well-rounded Haydenshapes logo, thus a brand was created.